Initial Startup Settings - Panasonic HL-G2 Series User Manual

3.6 Initial Startup Settings

3.6 Initial Startup Settings

■
Overview
After turning on the power supply for the first time or executing "Set value initialization", perform
the language, NPN/PNP, and analog output settings.
1.
When the power supply is turned on, the startup screen is displayed for two seconds and
then the language setting screen is displayed.
2.
Press the<UP>or<DOWN>key to select Japanese, English, or Chinese and then press
the<ENTER>key.
3.
The NPN/PNP setting screen is displayed. Select either NPN or PNP and press the
<ENTER> key.
4.
The Analog Output Select screen is displayed. Select either OFF, current, or voltage and
press the <ENTER> key.
5.
When the analog output setting is complete, the display changes to the measurement
display.
Setting method
3-14 WUME-HLG2AN-2