Functions And Wiring Of I/O Lines - Panasonic HL-G2 Series User Manual

3.5 Functions and Wiring of I/O Lines

● Before wiring, always turn the power OFF.
● Be sure to use the specified optional cables.
● Be sure to insulate the ends of leads that are not used.
■
CN-8A-C□ (For Analog output)
(Note 1) The sensor unit power supply (0 V) and analog GND terminals of this product are internally connected.
When connecting the sensor to a non-insulated analog input device, make sure that no potential
difference is created between the sensor unit power supply (0 V) and the GND of the analog input
device power supply.
Failure to do so may cause failure or malfunction of the connected device or this product.
WUME-HLG2AN-2

3.5 Functions and Wiring of I/O Lines

3-9