4. MOUNTING
• E+ Ext. LED, for example External indicator 2218; J2:2 (+)
• E- Ext. LED, for example External indicator 2218; J2:3 (-)
3.2 ZONE LINE INPUT
The conventional detector is connected to a zone line input (for conventional detectors) in the c.i.e. The
last unit on the zone line has an End-of-line device to be connected. The type of end-of-line device is
depending on the c.i.e. and the type of zone line input.
4
MOUNTING
The detector is plugged in a base.
Place the detector in the base with the detector's "Mark" in the same position as the "Mark" on the base
and turn the detector clockwise.
TECHNICAL DESCRIPTION 4318 • DOCUMENT NUMBER: MEW01961 • REVISION: 2
5