Table of Contents
Advertisement
Modulex Light Commericial Series
CHAPTER 4: Installation Instructions
4.5 REMOVAL FROM BOILER BED AND INSTALLATION OF BOILER FEET
See Figure 4-4 and follow the directions below to prepare the boiler for installation:
1) Remove the covers of the boiler.
2) Lift the boiler with a hoist or forklift bands.
3) Remove the 4 screws ''A''.
Covers
(Remove)
Figure 4-4: EXT Unpacking (Left = With Covers, Right = Lifted Without Covers)
4) Retrieve the four (4) support feet from one of the cardboard boxes packaged with the boiler.
5) Attach the four (4) support feet to the chassis using the four ''A'' screws removed in Step 3
(Figure 4-5).
6) Place the boiler on concrete slab and re-mount the cover(s) over the boiler.
OMM-0087_J • GF-143 • 11/17/2020
Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST
Page 32 of 150
Advertisement
Table of Contents
