Scan To Ftp - Pantum PT14C2A Series User Manual

Scan to FTP

Be sure the user is in an Internet-connected environment in scanning files to FTP server. If you
want to scan large files, you may need to input the server address, user name and password to log
in the server, with specific operation steps as below:
1. Be sure the printer and the computer are both switched on and connected with each other
properly.
2. Configure the FTP address book.
3. Put the original on the glass platen.
4. Press "Scan" on the control panel. and then press "OK".
5. Press "▲" or "▼" to select "E-mail Address Book" or "Group Mail" and press "OK" button.
6. Press "▲" or "▼" to select the options under "Scan to", and then press "OK".
7. Press "▲" or "▼" to select "Scan to FTP", and then press "OK".
8. Press "▲" or "▼" to select the server. Press "OK". Press "Start" to start the scan.
32