Control Panel - Pantum PT14C2A Series User Manual

Control Panel

Overview of control panel
No. Name
1 Power switch
2 Start Button
3 LCD Display
4 Scan Button
5 Copy Button
6 Wi-Fi button
7 ID copy
8 Cancel
9 Bill Copy Button
Functions
• Turn the power on or off and press this button under Ready state to
enter energy-saving mode.
• Press and hold this button for more than 2s to turn the printer power
off.
• This is used to start relevant operations after finishing operation
settings.
• In case of a feed failure, please press this key for pick-up and printing
again.
• Display operation interface and product information.
• Press this button to enter into scan mode.
• Press this button to enter into copy mode.
• Short press Wi-Fi button to turn on direct Wi-Fi connection of the
printer and automatically print out "Mobile Device Wi-Fi Connection
Wizard" page (for models with Wi-Fi function only).
• Long press Wi-Fi button for over 2s to start WPS when Wi-Fi is not
connected or to disconnect Wi-Fi when it has already been connected
(for models with Wi-Fi function only).
• Open save toner function(applicable to non-Wi-Fi model only).
• Press it to enter the ID copy mode.
• Execute cancel operation.
• Idle state interface under copy mode, to reset the "Number of Copies"
to 01.
• Press this button to enter into Bill Copy mode.
3