Id Copy Settings; Receipt Setting - Pantum PT14C2A Series User Manual

4. After copying the first side, open the upper cover of the glass platen, turn the long edge of the
original for 180 degrees (with B side down) on the glass platen, and close the upper cover of the
glass platen.
Note: • If the turnover prompt on panel times out, the machine will execute one-sided copying
automatically.
5 Press "Start" to begin copying the other side.

ID copy settings

For better copying effects, you can change the corresponding settings via the "ID Copy Settings"
menu.
1. Press "ID Copy" and "Menu" on the control panel to enter the "Menu Settings" interface.
2. Press "OK" button and enter "ID Printing Settings" interface.
3. Press "direction key to select option to be set and press "OK key" to set option.

Receipt setting

For better copying effect of bills, you can enter the "Bill Copy Setting" menu to change relevant
settings.
1. Press "Bill Copy" and then "Menu" on control panel to enter the "Menu Settings" interface.
2. Press "OK" to enter the "Bill Copy Setting" interface.
3. Press "direction key to select option to be set and press "OK key" to set option.
28