Table of Contents
Advertisement
2.3 Jumper Settings
The PCM-3724 has been designed with ease-of-use in mind. It has one
function switch and six jumper setting. The following sections tell how to
configure the module. You may want to refer to the figure below for help
identifying module components.
Note: Do not install or remove the PCM-3724 I/O board while the power
is ON, as this may damage the plug-in board or CPU card.
The following diagram shows the location of the module's switches and
jumpers:
Figure 2.1: Location of Connectors and Jumpers
9
Chapter 2
Advertisement
Table of Contents
