Download Print this page
Advantech PCM-9591 Startup Manual
Advantech PCM-9591 Startup Manual

Advantech PCM-9591 Startup Manual

Amd dual core s1 sbc with hdmi/lvds/ lan/audio/20 bit gpio/ 4 sata/nvram/tpm/2nd rtc

Advertisement

Quick Links

PCM-9591 AMD Dual Core S1 SBC with HDMI/LVDS/
LAN/Audio/20 bit GPIO/ 4 SATA/NVRAM/TPM/2nd RTC
Startup Manual
Packing List
Before you begin installing your card, please make sure that
the following items have been shipped:
1.
PCM-9591 all-in-one single board computer x1
2.
Startup manual x1
3.
CD disk for utility and drivers x1
4.
Mini Jumper (10 pcs package) x1
5.
Cooler (73*50*31 mm) x1
If any of these items are missing or damaged, please con-
tact your distributor or sales representative immediately.
Note 1:
For detailed contents of PCM-9591, please refer
to information on the enclosed CD-ROM (in PDF
format).
Note 2:
Acrobat Reader is required to view any PDF
file.Acrobat Reader can be downloaded at:
www.adobe.com/Products/acrobat/readstep2.
html (Acrobat is a trademark of Adobe)
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/epc
For technical support and service, please visit our
support website at:
http://service.advantech.com.tw/eservice/
This manual is for the PCM-9591 series Rev. A1
Part No. 2006959100
Print in China
General
p/n: 9689000002
p/n:1750001620
I/O
Ethernet
Display
1st Edition,
July 2008
Specifications
CPU: AMD FPGA 638P S1 Processor supported
2nd Cache Memory: Depends on CPU from 512KB to
1 MB
System Chipset: AMD M690E + SB600
BIOS: AWARD 8 Mbit Flash BIOS
System Memory: 2 x 200-pin SODIMM sockets, Double
Data Rate (DDR2) up to 4 GB (Support FSB 533/667
MHz)
Power Management: APM 1.2, ACPI support
Watchdog Timer: 255-level interval timer, setup by soft-
ware, Super I/O integrated, SMSC Controller
Expansion Interface: Support one PCI-E x1 slot and one
mini PCI interface
Battery: Lithium 3 V / 220 mAH
I/O Interface: 1 x EIDE (UDMA 133), 4 x SATA 150,
1 x K/B, 1 x Mouse, 3 x RS232, 1 x RS232/422/485
USB: 8 x USB 2.0 compliant Ports
Audio: HD Audio codec ALC883, support 7.1 channel
output, LIN-IN, FRONT, MIC-IN, CEN, SUR, SIDE
IrDA: N/A
GPIO: 20 bit general purpose for input or output
Chipset: 1 x Realtek RTL8111B-GR
Speed: 10/100/1000 Mbps
Interface: 1 x RJ45 by cable
Standard: IEEE 802.3u 100Base-T & IEEE 802.3ab
1000Base-T
Controller: AMD M690E
Side Port: Supports an optional dedicated local frame
buffer (side-port) of 64 MB through a 16 bit interface
VRAM: Share system memory up to 512 MB video
memory
LVDS LCD: 1 x 48 bit LVDS
HDMI: 1650 Mbps/channel+
DVI: Single or Dual Channel (DVi Optional)
Dual Independent Display: CRT+LVDS, HDMI+LVDS,
DVI+LVDS, CRT+DVI, CRT+HDMI (DVI Optional)
PCM-9591 Startup Manual 1

Advertisement

loading

Summary of Contents for Advantech PCM-9591

  • Page 1 Dual Independent Display: CRT+LVDS, HDMI+LVDS, For technical support and service, please visit our DVI+LVDS, CRT+DVI, CRT+HDMI (DVI Optional) support website at: http://service.advantech.com.tw/eservice/ This manual is for the PCM-9591 series Rev. A1 Part No. 2006959100 1st Edition, Print in China July 2008...
  • Page 2: Specifications

    The table below lists the function of each of the jumpers an CN25 uDOC Connecter connectors. CN26 RJ45+USB Connecter Audio JACK Connecter CN27 CN28 USB Connecter VGA Connecter CN29 CN31 COM 1/2 Connecter CN32 System Fan CN33 HDMI Connecter MINIPCI Connecter CN34 CN37 CF TYPEII Connecter  PCM-9591 Startup Manual...
  • Page 3 MALE SQUARE PIN 2.0 mm You can use SUSI GPIO API to read the SW2 and SW3 Setting Function status. For Detail, You can refer to PCM-9591 FPGA user manual. (5-6) (7-9) (8-10) RS232 (13-15)(14-16) LVDS LCD Panel ID Setting...
  • Page 4 PCM-9591 Jumpers & Connectors (Component Side) CN34 CN37 CN25 PCM-9591 Jumpers & Connectors (Component Side)  PCM-9591 Startup Manual...
  • Page 5 140.97 [5.550] 135.89 [5.350] 135.89 [5.350] PCM-9591 Jumpers & Connectors (Solder Side) PCM-9591 Mechanical Drawing (Component Side) 40.37 [1.589] 14.63 [0.576] 12.73 [0.501] 14.41 [0.567] 12.18 [0.480] 11.69 [0.460] 9.35 [0.368] 2.30 [0.090] 0.00 [0.000] 0.00 [0.000] 5.08 [0.200] PCM-9591 Mechanical Drawing (Component Side) 140.97 [5.550]...