Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Advantech PCM-4153
Summary of Contents for Advantech PCM-4153
- Page 1 User Manual PCM-4153 PC/104+ SBC w/AMD LX800, VGA, LCD, LAN, USB2.0 and Flash...
- Page 2 No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd.
-
Page 3: Declaration Of Conformity
Packing List Before you begin installing your card, please make sure that the following materials have been shipped: 1 x PCM-4153 SBC 1 x AT Power cable (p/n:1700003491) 1 x Audio cable (p/n:1700000918) 1 x Four COM cable (p/n:1701400181) - Page 4 Technical Support and Assistance Visit the Advantech web site at www.advantech.com/support where you can find the latest information about the product. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information ready before you call: –...
-
Page 5: Table Of Contents
Virus Warning ................16 3.5.2 First/Second/Third/Other Boot Device ........16 3.5.3 Boot Up NumLock Status............16 3.5.4 Gate A20 Option ................. 16 3.5.5 Typematic Rate Setting............... 16 3.5.6 Typematic Rate (Chars/Sec)............16 3.5.7 Typematic Delay (msec) ............. 16 PCM-4153 User Manual... - Page 6 CMOS Setting for Panel Type ........... 24 Connections to Two Standard LCDs............24 4.2.1 AMD Geode LX................24 Table 4.1: Connections to Sharp LQ121S1DG31 / PCM-4153 . 24 Installation of the SVGA Driver ............... 25 4.3.1 Installation Chipset AES Driver........... 26 4.3.2...
- Page 7 Table B.4: Interrupt Assignments..........62 Appendix C Mechanical Drawings ......63 Mechanical Drawings ................64 Figure C.1 PCM-4153 Mech drawing (comp side) ..... 64 Figure C.2 PCM-4153 mech drawing (sol side) ......64 Appendix D Prog. GPIO & Watchdog Timer..65 PCM-4153 User Manual...
- Page 8 GPIO Function: Its Call by Int15 Hook............ 66 PCM-4153 User Manual viii...
-
Page 9: Chapter 1 General Information
Chapter General Information This chapter gives background information on the PCM-4153. Sections include: Introduction Features Specifications Board Layout: Dimensions... -
Page 10: Introduction
TTL interfaces and two Ethernet ports. For those who want superior performance for various low-power embedded applica- tions, PCM-4153 uses an AMD LX-800 processor clocked at 500 MHz, in conjunction with onboard DDR333 system memory. -
Page 11: Vga/Lvds Interface
Audio interface: Microphone in, Line in, Line out 1.3.5 OS support This board supports Win XP, Win CE and Win XPe. For further information about OS support in your PCM-4153, visit the following web resource Advantech: website: www.advantech.com or please contact tech- nical support center 1.3.6 Mechanical and Environmental Dimensions: 96 x 115 mm (3.77"x 4.05") -
Page 12: Board Layout: Dimensions
Board Layout: Dimensions Figure 1.1 Board layout: dimensions (component side) 95.89 87.63 87.63 62.91 23.63 14.49 8.26 8.26 0.00 Figure 1.2 Board layout: dimensions (solder side) PCM-4153 User Manual... -
Page 13: Chapter 2 Installation
Chapter Installation This chapter explains the setup procedures of the PCM-4153 hard- ware, including instructions on setting jumpers and connecting peripherals, switches and indica- tors. Be sure to read all safety pre- cautions before you begin the installation procedure. -
Page 14: Jumpers
Jumpers The PCM-4153 has a number of jumpers that allow you to configure your system to suit your application. The table below lists the functions of the various jumpers. Table 2.1: Jumper/Switch Setting: DOTREF Select Clear CMOS Flash Master/Slave select... -
Page 15: Connectors
With +5V (2-3) With +3.3V (Default) Connectors Onboard connectors link the PCM-4153 to external devices such as hard disk drives, a keyboard, or floppy drives. The table below lists the function of each of the board’s connectors. Table 2.2: Connectors... -
Page 16: Locating Connectors
Locating Connectors Figure 2.1 Connectors (component side) CN27 Figure 2.2 Connectors (solder side) PCM-4153 User Manual... -
Page 17: Setting Jumpers
Unlike floppy drives, IDE hard drives can connect to either end of the cable. If you install two drives, you will need to set one as the master and one as the slave by using jumpers on the drives. If you install only one drive, set it as the master. PCM-4153 User Manual... -
Page 18: Flash
Power Connectors (CN38) 2.9.1 Main Power Connector, +5 V, +12 V (CN38) Supplies main power +5V to the PCM-4153, and to devices that require +12 V. 2.9.2 Power Reset Button Momentarily pressing the reset button will activate a reset. The switch should be rated for 10 mA, 5 V. -
Page 19: Table 2.3: Serial Port Rs-422/485 (Cn39)
The CRT display connector is a 15-pin D-SUB connector used for conventional CRT displays. 2.12.2 TTL TFT LCD Connector (CN4) For PCM-4153 series, CN4 consists of a 40-pin connector which can support up to 24-bit LCD panel. It is Hirose’s product no. DF13A-40DP-1.25 V 2.13 Ethernet Configuration The board is equipped with two high performance 32-bit PCI-bus Ethernet interface which are fully compliant with IEEE 802.3U 10/100Mbps standards. - Page 20 CN37) The board supports 8-bit GPIO through GPIO connector. The 8 digital inputs and out- puts can be programmed to read or control devices, with each input or output defined. The default setting is 8 bits input. PCM-4153 User Manual...
-
Page 21: Chapter 3 Award Bios Setup
Chapter Award BIOS Setup... -
Page 22: Introduction
BIOS supports your CPU. If there is no number assigned to the patch code, please contact Advantech’s appli- cations engineer to obtain an up-to-date patch code file. This will ensure that your CPU’s system status is valid. -
Page 23: Standard Cmos Setup
Advanced BIOS Features screen. A quick booting func- tion is provided for your convenience. Simply enable the Quick Booting item to save yourself valuable time. Figure 3.2: Advanced BIOS features screen PCM-4153 User Manual... -
Page 24: Virus Warning
To disable security, select “PASSWORD SETTING” in the main menu. At this point, you will be asked to enter a password. Simply press <Enter> to disable security. When security is disabled, the system will boot, and you can enter Setup freely. PCM-4153 User Manual... -
Page 25: Integrated Peripherals
“ECP” allows the parallel port to operate in bi-directional mode and at a speed faster than the maximum data transfer rate. “ECP + EPP” allows normal speed operation in a two-way mode. PCM-4153 User Manual... -
Page 26: Epp Mode Select
User Defined (Default) Allows you to set each mode individually. When not disabled, each of the ranges are from 1 min. to 1 hr. except for HDD Power Down which ranges from 1 min. to 15 min. and disable. PCM-4153 User Manual... -
Page 27: Video Off In Suspend
When Enabled, the system will resume from suspend mode if FDD, COM port, or LPT port is active. The choice: Enabled, Disabled. 3.7.10 PCI PIRQ [A-D]# When Enabled, the system will resume from suspend mode if an interrupt occurs. The choice: Enabled, Disabled. PCM-4153 User Manual... -
Page 28: Pnp/Pci Configurations
The commands here are “Auto” or “Manual.” Choosing “manual” requires you to choose resources from each following sub-menu. “Auto” automatically configures all of the boot and Plug and Play devices but you must be using Windows 95 or above. 3.8.4 PCI/VGA Palette Snoop This is left at “Disabled.” PCM-4153 User Manual... -
Page 29: Pc Health Status
CMOS. The password must be no longer than eight (8) characters. Remember, to enable the password setting feature, you must first select either “Setup” or “System” from the “Advanced BIOS Features” menu. PCM-4153 User Manual... -
Page 30: Save & Exit Setup
This record is required for the system to operate. 3.12 Exit Without Saving Selecting this option and pressing <Enter> lets you exit the setup program without recording any new values or changing old ones. PCM-4153 User Manual... -
Page 31: Pci Svga/Lcd Setup
Chapter PCI SVGA/LCD Setup This chapter details the software configuration information. It shows you how to configure the card to match your application requirements. The AWARD Sys- tem BIOS is covered in Chapter 4. Sections include: Installation of SVGA drivers for Window XP Connections for standard LCDs Further information... -
Page 32: Introduction
The system is initially set to dual display mode. If you want to enable the CRT display only or the flat panel display only, please set them up from the BIOS screen, or, contact Advantech technical support center. 4.1.2... -
Page 33: Installation Of The Svga Driver
Table 4.1: Connections to Sharp LQ121S1DG31 / PCM-4153 ENAB +3.3 V +3.3 V * The polarity of both synchronous signals are negative. Installation of the SVGA Driver Complete the following steps to install the SVGA driver. Follow the procedures in the flow chart that apply to the operating system that you are using within your board. -
Page 34: Installation Chipset Aes Driver
4.3.1 Installation Chipset AES Driver Open device manager, right click on entertainment then, click on properties Go to driver page and click on update driver. Click on install from specific folder and click on next. PCM-4153 User Manual... - Page 35 Click on browse and select target folder, then, click OK. Click on next. Click on finish. PCM-4153 User Manual...
-
Page 36: Installation Of Vga Driver
4.3.2 Installation of VGA Driver Right click on video, and click “ Properties”. Go to driver page and click on update driver. PCM-4153 User Manual... - Page 37 Click on install from specific folder and click on next. Click on browse and select target folder, then click OK. Click on next, then click on finish. PCM-4153 User Manual...
- Page 38 Then click on continue anyway. Click on finish. PCM-4153 User Manual...
-
Page 39: Pci Bridge
4.3.3 PCI Bridge The system may detect PCI bridge automatically. If the question mark is shown on device manager, please install the driver as below: Click “Add Hardware Wizard” and add new hardware wizard PCM-4153 User Manual... -
Page 40: Further Information
Search the right directory of PCI bridge for IT8888G driver. Installation finished. Further Information For further information about the AGP/VGA installation of your PCM-4153, including driver updates, troubleshooting guides and FAQ lists, visit the following web resources: Intel website: www.intel.com Advantech websites: www.advantech.com... -
Page 41: Audio Setup
Chapter Audio Setup The board is equipped with an audio interface that records and plays back CD-quality audio. This chapter provides instructions for installing the software drivers included on the audio driver dis- kettes. -
Page 42: Introduction
SETUP program to install the drivers; don’t copy the files manually. Note! The files on the software installation diskette are compressed. Do not attempt to install the drivers by copying the files manually. You must use the supplied SETUP program to install the drivers. PCM-4153 User Manual... -
Page 43: Windows Xp Drivers
5.2.2 Windows XP Drivers Open device manager, right click on audio and click on “properties”. Go to driver page and click on update driver. Click on install from specific folder and click on next. PCM-4153 User Manual... - Page 44 Click on browse and select target folder, then click OK. Click on next. PCM-4153 User Manual...
- Page 45 Click on continue anyway. Click on finish. PCM-4153 User Manual...
- Page 46 PCM-4153 User Manual...
-
Page 47: Chapter 6 Ethernet Interface
Chapter Ethernet Interface This chapter provides informa- tion on Ethernet configuration. Sections include: Introduction Installation of Ethernet drivers for Windows XP Further information... -
Page 48: Introduction
Note! The windows illustrations in this chapter are examples only. Follow the steps and pay attention to the instructions which appear on your screen. 6.2.1 Installation for Windows XP Select "Start", "Settings". "Control Panel". Double click "Network". PCM-4153 User Manual... - Page 49 Click “Add new hardware wizard” and prepare to install network function Choose Hardware Device “Ethernet Controller” PCM-4153 User Manual...
- Page 50 Insert the CD into D: drive a. Fill in the Find the LAN chipset folder at the directory of PCM-4153 win2000 folder from CD ROM drive b. Click “OK”. Choose the "Intel® GD82559ER PCI Adapter" item PCM-4153 User Manual...
- Page 51 Click “Next” Make sure the configurations of relative items are set correctly Click “OK” PCM-4153 User Manual...
-
Page 52: Further Information
Further information Intel website: www.intel.com Advantech websites: www.advantech.com www.advantech.com.tw PCM-4153 User Manual... -
Page 53: Appendix A Pin Assignments
Appendix Pin Assignments This appendix contains informa- tion of a detailed or specialized nature. -
Page 54: Jumper And Connector Tables
(2 - 3) Clear-CMOS Table A.3: CN39, COM2 Setting Part Number 1653003260 Footprint JH3X2S-2M PIN HEADER 3*2P 180D SMDMALE SQUARE PIN Description 2.0mm Setting Function (1 - 2) RS232 (3 - 4) RS485 (5 - 6) RS422 PCM-4153 User Manual... -
Page 55: Table A.4: J4-Flash Select
Table A.6: CN38, Power Input Part Number 1655204030 Footprint PWR-B4PV Description PIN HEADER DIP 8*1P 180D(M) 2.00mm Pin Name Signal Type Signal Level +5 V +5 V +5 V +5 V +5 V +5 V +12 V +12 V PCM-4153 User Manual... -
Page 56: Table A.7: Cn4, Tft Lcd I/F
+3.3 V +5 V +5 V +5 V +5 V +5 V +5 V +5 V +3.3V +3.3 V +3.3 V +3.3 V +3.3 V +3.3 V +3.3 V +3.3 V DOTCLK +3.3 V +3.3 V +3.3 V PCM-4153 User Manual... -
Page 57: Table A.8: Cn5, Inverter Power
SMB-CLK SMB-DAT Table A.10: CN32, Reset / Buzzer pin header Part Number 1655302020 Footprint WHL2V-2M Description PIN HEADER DIP 3*2P 180D(M) 2.00 mm Pin Name Signal Type Signal Level +3.3 V -3.3 V Buzzer - Buzzer + PCM-4153 User Manual... -
Page 58: Table A.12:Cn36, Gpio1
PIN HEADER SMD 5*1P 180D(M) 2.54mm Pin Name Signal Type Signal Level GPIO4 GPIO5 GPIO6 GPIO7 Table A.14: CN11, IDE Part Number 1653222262 Footprint BH22X2SV Description BOX HEADER SMD 22*2P 180D(M) 2.0 mm IDIOT-PROOF Pin Name Signal Type Signal Level RST# PCM-4153 User Manual... - Page 59 +3.3V DREQ IOW# IOR# IORDY CSEL# DACK# IRQ14 D66DET# CS#1 CS#3 ASP# PCM-4153 User Manual...
-
Page 60: Table A.15:Cn27, Crt
+2.5 V DCLK OD I/O +2.5 V HSYNC +2.5 V VSYNC +2.5 V Table A.16: CN15, USB1/2 Part Number 1653005260 Footprint JH5X2S-2M Description PIN HEADER 5*2P 180D(M) 2.0 mm SMD IDIOT-PROOF Pin Name Signal Type Signal Level PCM-4153 User Manual... -
Page 61: Table A.17:Cn17, Usb3/4
Signal Level DCD#1 DSR#1 RXD1 RTS#1 TXD1 CTS#1 +5 V DTR#1 +5 V RI#1 +5 V DCD#2 +5 V DSR#2 +5 V RXD2 +5 V RTS#2 +5 V TXD2 +5 V CTS#2 +5 V DTR#2 +5 V PCM-4153 User Manual... -
Page 62: Table A.19:Cn19, Print Port
BOX HEADER SMD 13*2P 180D(M) 2.0 mm Pin Name Signal Type Signal Level STB# +5 V AFD# +5 V +5 V ERR# +5 V +5 V INIT# +5 V +5 V SLIN# +5 V +5 V +5 V +5 V PCM-4153 User Manual... -
Page 63: Table A.21:Cn35, Audio-Out
+5 V 422-RXD+ +5 V 485-422-TXD+ +5 V 485-422-TXD- +5 V Table A.21: CN35, AUDIO-OUT Part Number 1655303020 Footprint WHL3V-2M Description WAFER BOX 2.0 mm 3P 180D w/LOCK Pin Name Signal Type Signal Level LIN-OUT-R Analog LIN-OUT-L Analog PCM-4153 User Manual... -
Page 64: Table A.22:Cn34, Audio-In
Footprint BH5X2SV Description BOX HEADER SMD 5*2 180D (M) 2.0 mm Pin Name Signal Type Signal Level +3.3 VL +3.3 V LAN1-ACTLED Analog LAN1-RX+ Analog LAN1-RX- Analog LAN1-LILED Analog LAN2-LCT Analog LAN2-LCT Analog LAN1-TX+ Analog LAN1-TX- Analog PCM-4153 User Manual... -
Page 65: Table A.25:Cn26, Lan2
Table A.26: CN18, KB/MS Part Number 1653205260 Footprint BH5X2SV Description BOX HEADER DIP 6*1 180D (M) 2.0 mm Pin Name Signal Type Signal Level KB-CLK +5 V KB-DATA +5 V MS-CLK +5 V +5 V +5 V MS-DATA +5 V PCM-4153 User Manual... - Page 66 PCM-4153 User Manual...
-
Page 67: Appendix B System Assignments
Appendix System Assignments This appendix contains informa- tion of a detailed nature. Sections includes: System I/O ports 1st MB memory map DMA channel assignments Interrupt assignments... -
Page 68: System I/O Ports
Reserved 3D0-3DF Color/graphics monitor adapter 3E8-3EF Reserved (Series port 3) 3F0-3F7 Diskette controller 3F8-3FF Serial port 1 * PNP audio I/O map range from 220 ~ 250H (16 bytes) MPU-401 select from 300 ~ 330H (2 bytes) PCM-4153 User Manual... -
Page 69: 1St Mb Memory Map
Function Available Available (audio) Floppy disk (8-bit transfer) Available (parallel port) Cascade for DMA controller 1 Available Available Available * Audio DMA select 1, 3, or 5 ** Parallel port DMA select 1 (LPT2) or 3 (LPT1) PCM-4153 User Manual... -
Page 70: Interrupt Assignments
IRQ 15 Secondary IDE for CFC * Ethernet interface IRQ select: 9, 11, 15 * PNP audio IRQ select: 9, 11, 15 * PNP USB IRQ select: 9, 11, 15 * PNP ACPI IRQ select: 9, 11, 15 PCM-4153 User Manual... -
Page 71: Appendix C Mechanical Drawings
Appendix Mechanical Drawings... -
Page 72: Mechanical Drawings
Mechanical Drawings Figure C.1 PCM-4153 Mech drawing (comp side) 95.89 87.63 87.63 62.91 8.26 8.26 0.00 Figure C.2 PCM-4153 mech drawing (sol side) PCM-4153 User Manual... -
Page 73: Appendix D Prog. Gpio & Watchdog Timer
Appendix Prog. GPIO & Watchdog Timer... - Page 74 ; n means which group of GPIO you want to set bl= the n group of gpio status bit 0 = gpio 0 , 0 => Low; 1 => High bit 1 = gpio 1 , 0 => Low; 1 => High ..PCM-4153 User Manual...
- Page 75 ;enable WDT function bit [0]=01h ;==================================================== mov dx,SCH3114_IO + 90h mov al,01h out dx,al ;==================================================== ;65H ;bit [1:0]=Reserved ;bit [6:2]Reserve=00000 ;bit [7] WDT time-out Value Units Select ;Minutes=0 (default) Seconds=1 ;==================================================== mov dx,SCH3114_IO + 65h ; mov al,080h out dx,al ;==================================================== PCM-4153 User Manual...
- Page 76 ;WDT timer time-out value ;bit[7:0]=0~255 ;==================================================== mov dx,SCH3114_IO + 66h mov al,01h out dx,al ;==================================================== ;bit[0] status bit R/W ;WD timeout occurred =1 ;WD timer counting = 0 ;==================================================== mov dx,SCH3114_IO + 68h mov al,01h out dx,al .exit PCM-4153 User Manual...
- Page 77 PCM-4153 User Manual...
- Page 78 No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permis- sion of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2009...
Need help?
Do you have a question about the PCM-4153 and is the answer not in the manual?
Questions and answers