Receiver Diagnostic Testing; System Information (Read Only); System Reset Defaults - DSC TL280LEX(R) Manual

Receiver Diagnostic Testing

[901] Diagnostic Test Transmission
[1] Ethernet 1 Default (OFF).
[2] Ethernet 2 Default (OFF).
[3] Cellular 1 Default (OFF).
[4] Cellular 2 Default (OFF).
[902] Load Programming Template
[1] Connect Alarm -Ethernet.
[2] Connect Alarm - Cellular.
[961] Cellular Inactivity Timeout
Default (41)
Valid entries from, 00 to FF.

System Information (Read Only)

[971] EEPROM version
Default (05400402)
[972] Virtual Keypad Language Version
[976] Radio Configuration File Version
[977] Cellular NetworkProvider - MCC/MNC Code
[978] Cellular Network Type
00 GPRS (2G)
01 EDGE (2G)
02 WCDMA (3G)
03 HSDPA (3G)
04 LTE (4G)
05 LTE Advanced (4G)
06 CDMA (2G)
07 EVDO (3G)
[979] Cellular Network CSQ
[980] Radio Reset Codes
[981] Radio Type
[982] Radio Firmware Version
[983] Firmware Update Diagnostics Section
[984] Communicator Status
[985] Radio Initialization Status
[986] System Toggle Options 4
[1] Remote Shutdown Enable Default (OFF).
[2] - [8] Reserved
[987] Language Version
[988] DNS 1 IP Address
[989] DNS 2 IP Address
[990] Boot Loader Version
[991] Communicator Firmware Version
[992] Ethernet IP Address
[993] Ethernet Gateway Address
[994] Cellular IP Address
[995] SIM Number
____________________________________
[996] Cellular Telephone Number
This number is required for DLS and Firmware upgrades.
____________________________________
[997] IMEI Number
____________________________________
[998] MAC Address

System Reset Defaults

[999] Software Default
Default (99); Valid entries are 00-Default or 55-Reset
66