Advertisement
4
4 . Holding the ribber with both hands so
that the gate pegs of the ribber are up
and the purl needle butts are toward you.
Insert the lower lip of right bracket beneath
the knitter bed as far as it will go, then insert
the left bracket.
5 . Using the Spanner, put the thumb screws
to both brackets of the ribber.
6. Place the rear foot of the KR carriage into
left end of the rear rail of the needle bed,
and keeping off the front foot from the
front rail, move the KR carriage to right as
shown in the photograph.
*
The KR carriage is packed in an accessories
box.
Advertisement
