Advertisement
b. Arrange the plain and purl needles in
position B of each bed.
Note
:
Both end needles must be plain
needles.
c. Move the connected carriage a few
times over all arranged needles to set
them in a line. Then, place the carriage
at right end of the bed.
3. First row knitting
a. Thread the yarn into the yarn feeder.
b. Move the connected carriage from right
to left. (The yarn will hang on plain and
purl needles.)
4 . Hang on the cast-on comb
This is the same as 1
5 . Hang on the weights
Hang the weights as per Standard weights
chart on page 1 3 on the cast-on comb to
keep balance.
6. Perfect selvedge
a. Set the carriages as shown in the Fig. 80.
b. Move the connected ca r riage from left
to right. (Only the plain needles knit.)
c. Move the connected carriage from right
to left.
(The purl needles knit the stitches.)
d. Move the connected carriage from left
to right. (The plain needles knit.)
FULL NEEDLE RIB KNITTING
*
After knitting the selvedge, set the
carriages as shown in the Fig. 8 1 .
Then, continue the knitting.
1 rib.
x
78
79
N
80
81
NL
2
◄PART
II
2
NL
n
23
Advertisement
