Advertisement
20
e . Raise a purl needle in the left side to
position B.
f . Move the connected carriage a few
times over all arranged needles to set
them in a line.
Then, place the carriage at right end of
the bed.
3. First row knitting
a. Thread the yarn into the yarn feeder.
b. Move the connected carriage from right
to left. (The yarn will hang on plain and
purl needles.)
4. Hang on the cast-on comb
*
This is ii, the same way ·as 1
a. Hold the cast-on comb with the face
having the protrusions facing you and
the comb o n top.
b. Put the cast-on comb between the
knitter and the ribber from underneath
and insert the comb between the yarn
hanging on the needles. And pass the
wire.
c. Hook the loose end of the yarn around
the yarn clip.
5. Hang on the weights
Hang the weights as per Standard
weights chart on page 1 3 on the cast
on comb to keep balance.
6. Perfect selvedge
a. Set the carriages as shown in the Fig. 69.
b. Move the connected carriage from left
to right.
(Only the plain needles knit.)
c . Move the connected carriage from right
to left.
(The purl needles knit.)
d. Move the connected carriage from left
to right.
(The plain needles knit.)
66
67
x
1 rib.
68
69
70
7 1
NL
3
N
◄PART
P.R
Return to position A
Advertisement
