Advertisement
If the carriage should
1 . D isconnect the carriage
See on the page 1 2.
*
I n case of the combination of KH-8 3 0/
K R -8 3 0.
a. Set the Change knob on KH carriage to
"C R" position, and lift up the KH
carriage.
b. Place the KH carriage to the side from
where the row commenced, then return
the Change knob to the position which
has set before jamming.
* In case of the combination of
K R -8 3 0.
a. Turn both Carriage release levers of KH
carriage as far as they will go, and lift
up the K H carriage .
b. Place the KH carriage to the side from
where the row comr,:ienced, and lock up
both Carriage release levers.
2. Remove the front foot from the front rail
of K R needle bed. And place the K R
carriage at the same side of K H carriage.
(Fig. 145)
3 . Connect both carriages.
4. Wor k the corrections if required.
5 . Continue the knitting.
1 43
KH-820/
1 44
1 45
Jam · · · · · · · · ·
4 3
Advertisement
