Advertisement
6
10. Lower the reinforcing arm of bracket,
and place the flat part of arm on the
table.
11. Using the clamps of KH, fasten the arm
to the table.
12. Set up the Yarn tension unit.
*
In case of the combination of KH-820/
KR-830, use the yarn tension unit of
KH-820 without any changes.
*
In case the knitter is KH-830, change the
angle of the yarn tension unit as follows
a. Take off the head of Yarn tension unit
and put it to the rod reversely.
10.___._ __ ,._ ____ _
:
r
Advertisement
