Advertisement
How to
1. Cast-on comb
Cast-on comb is used for casting-on the
first stitches which is the selvedge of the
knitting.
Choose long or small comb
depending on the knitting width.
* Also you can use the Short cast-on comb
as a weight hanger, as detailed below : -
1
· .
Hold " t he Short cast-on comb with
points facing you.
up, then pass the knitting work between
the presser bar and comb from back
side.
2. Pull the end of knitting work down
and turn the cast-on comb
in the Fig. 33 so that the cast-on comb may
buckle on the knitting work.
the weights on the cast-on comb.
3. When you reset the cast-on comb, simply
pull the knitting work up so that the
cast-on comb may go up.
Then pull the knitting work down to lock
up .
2. Weights
Number of weights to be used depends
on the width of knitting and pattern.
Hang the weights on the cast-on comb so
that they hold the knitting work in balance.
®
use
the
Lift the presser bar
CD.
as shown
Then hang
accessories
34
'---------------------'
Standard weights chart
No. of stitches
50
50
100
100
150
150
200
36
Knitting work
Small weight
Large weight
1
2
3
4
13
2
2
Advertisement
