Advertisement
26
2 . Needle arrangement
a. Set the half pitch lever to "H" .
b. Arrange the plain and purl needles in
position B of each bed.
Note
:
The number of needles between
plain and purl needle must be
same.
c. Move the connected carriage a few
times over all arranged needles to set
them in a line. Then, place the carriage
at right end of the bed.
3. First row knitting
a. Th read the Cast-on thread provided in
the accessories of KH into the yarn
feeder.
b. Move the connected carriage from right
to left. (The cast-on thread will hang on
plain and pu r l needles.)
4. Hang on the cast-on comb
*
This is the same way as 1
5 . Hang on the weights
Hang the weights as per Standard weights
chart on page 1 3 on the cast-on comb to
keep balance.
6. Remove the cast-on thread from the yarn
feeder, and rethread the knitting yarn
into the feeder.
C IRCULAR RIB KNITTING
* Set the carriages as shown in the Fig. 9 1.
Then, continue the knitting.
90.)
(see'
Fig.
89
90
1 rib.
x
9 1
6
NL
N
Advertisement
