Connection/Preparation; Setting Up With Stand; Preparing For Mounting On The Vesa Installation Kit - Beko B32 D 560 B Brief Instruction

CONNECTION/PREPARATION

Setting up or hanging
Select a location so that no direct
7
sunlight falls on the screen.

Setting up with stand

To mount the stand, refer to the
7
installation instructions included.
Place the TV set on a hard, level surface.
7
Preparing for mounting on the
VESA installation kit
Contact authorised dealer to purchase the
bracket.
You will need the following:
A pair of scissors,
7
A cross-tip screwdriver.
7
Follow the installation instructions for the
VESA installation kit.
1 Place the TV set in the film on a
smooth surface with the screen facing
down.
2 Cut open the film on the back side
using the scissors.
3 Connect the required cables to the
connectors of television. Refer to
"Connections" section in this manual.
4 Tie the cables so they do not hang
down onto the floor.
5 Screw the VESA bracket onto the
TV set and mount it according to its
installation instructions.
- - ---------------------------------------------------
EN / 10
VESA