Table of Contents
Advertisement
8.4
Technical programming
The structure of the programming menu is indicated in
section "Structure of the Programming Menu".
The
section
"Description
Programming Menu" describes all the items in the
programming menu.
8.4.1
Access to the Technical Menu
Proceed as follows to access programming mode.
• Press the "OK" button to access the main menu.
• Scroll the main menu until you reach the "Tech
Menu" option.
• Press the "OK" button.
• Enter the password "5678"
The
above
procedure can only be
used
to
programming menu when
the machine has reached
operating temperature
The
menus
PASSWORD-protected.
The PASSWORD will not
be requested if set on the
default value (0000). It
should be changed upon
first
use
unauthorised access.
of
Messages
in
the
mentioned
access
the
should
be
to
prevent
After
this
password must be entered
each
time
shows:
In case you do not enter the
password within 4 seconds
the machine goes back to
the previous screen.
See the "Password setting" section to set the
PASSWORD. This section describes how to set it.
If
the
PASSWORD
forgotten, you can reset it
by entering a PUK code.
You have to request the
PUK code to the Saeco
service centre, who will
guide you through the
procedure.
English
change,
the
the
display
is
41
Advertisement
Table of Contents
