Related Manuals for Saeco VIENNA PLUS
Summary of Contents for Saeco VIENNA PLUS
- Page 1 TYPE SUP 018M OPERATING INSTRUCTIONS MODE D’EMPLOI INSTRUCCIONES DE USO INSTRUCÇOES E MODO DE EMPREGO Services Unlimited, Inc./Parts Guru Lansdale, PA 19446 Phone: 215-361-7000 Fax: 215-361-7434 email: sales@partsguru.com...
- Page 2 VIENNA CAFE GRANDE CAFE CREMA VIENNA DIGITAL Instructions are good for Spidem Trevi, Gaggia Syncrony Logic and Solis M5000 models Service Unlimited, Inc./ Parts Guru Lansdale, PA 19446 Phone: 215-361-7000 Fax: 215-361-7434 emai: sales@partsguru.com Saeco Edition 2003...
- Page 3 Services Unlimited, Inc./ Parts Guru Axor select Best Descaler, Coffee cleaner Liquid and 30 Gm. Food grade lube is available from Internet store www.shop.partsguru.com email: sales@partsguru.com...
- Page 4 Services Unlimited, Inc./ Parts Guru email: sales@partsguru.com...
- Page 5 Services Unlimited, Inc./ Parts Guru 1. INTRODUCTION VIENNA 5. Overview of product range TYPE Pre- Pre- Rapid Steam Display brewing grinding VIENNA CAFE GRANDE CAFE CREMA VIENNA DIGITAL CAFE NOVA Instructions are good also for Spidem Trevi models, Gaggia Syncrony Logic and Solis Master M5000 email: sales@partsguru.com...
- Page 6 Services Unlimited, Inc./ Parts Guru VIENNA DISASSEMBLY 1. Disassembly of the housing a) Remove the water tank and the coffee bean container cover. b) Remove the two fixing screws (1) of the coffee bean container. Fig. 1 c) Remove the housing screw (1) under the water tank (Torx/T10). d) Remove the housing screw (2) under the coffee bean container.
- Page 7 Services Unlimited, Inc./ Parts Guru DISASSEMBLY VIENNA e) Remove the two bottom housing screws (1). Pull the housing left of the electronic system slightly forwards and lift. Fig. 3 Move the upper housing slightly to the left so that the notch (1) of the steam dial is visible on the right side of the machine.
- Page 8 Services Unlimited, Inc./ Parts Guru VIENNA DISASSEMBLY 2. Disassembly of the base plate a) Release the base plate from the underside of the machine using a screw driver (see Fig. 5) and remove it from the housing. Fig. 5 email: sales@partsguru.com...
- Page 9 Services Unlimited, Inc./ Parts Guru DISASSEMBLY VIENNA 7. Disassembling the grinder a) Remove the two fixing screws (1). Remove the fixing screw on the upper grind adjustment ring (2). Fig. 18 b) Release the three fastening tabs (1) on the underside and remove the upper grind adjustment ring (2).
- Page 10 Services Unlimited, Inc./ Parts Guru VIENNA DISASSEMBLY c) Turn the grinding adjustment ring (1) clockwise until the three lugs of the grinding disc fitting (2) are clearly visible and remove the upper grinding disc from the grinder. Fig. 20 d) Remove the fixing screw (1) of the grinding cone (note: left thread) and carefully remove the grinding cone (friction clutch).
- Page 11 Services Unlimited, Inc./ Parts Guru DISASSEMBLY VIENNA Fig. 22 e) Carefully remove the clutch disc. Fig. 23 The sealing felt can then be cleaned. email: sales@partsguru.com...
- Page 12 Services Unlimited, Inc./ Parts Guru VIENNA 9. DISASSEMBLY 8. Adjusting the grinder a) Install the grinding ring onto its fitting so that the marking (1) on the grinding adjustment ring and the ring fitting (2) are adjacent to one another. Fig.
- Page 13 Services Unlimited, Inc./ Parts Guru 9. DISASSEMBLY VIENNA c) Turn about 12-14 notches in an anti-clockwise direction and check the grind level by making a test coffee (Crema / dregs grain size). Adjust the grind level as required (max. 3-5 notches). Install the upper grind level ring so that the marking on the upper grind adjustment ring (1) is next to the steam button.