Table of Contents
Advertisement
Select "OK" and press the "OK" button. The machine
dispenses a quantity of water sufficient to rinse the
milk circuit. The following screens appear:
Remove the container.
If you do not want to perform the rinse cycle, select
"NO" using the arrow key. Press the "OK" button.
After a certain time, this rinse request screen
automatically disappears and the machine goes back to
the ready for use mode.
Always remember to store
milk in the fridge when not
used.
This function allows the machine to preserve proper
hygiene and operating conditions. However, this
should not be considered sufficient to clean the milk
circuit.
The Cappuccinatore light cleaning cycle can be
performed any time by following the procedure below:
With the machine on, press the "OK" button.
The following screen is displayed:
Press
the
"Down"
button
CAPPUCCINATORE" and press the "OK" button to
confirm.
Select
the
option
"CAPPUCCINATORE
CLEAN" and confirm with the "OK" button.
The cleaning cycle starts. The following screen is displayed:
English
to
select
"CLEAN
LIGHT
65
Advertisement
Table of Contents
