Table of Contents
Advertisement
The machine must be fully
free of limescale before
starting to use the water
filter.
In case you did not activate
the filter upon first use and
you
already
more than 50 cups (with
100-ml capacity), descale
the
machine
activating the filter.
Replace the water filter as
soon as the capacity drops
to 0% and the filter icon
starts
blinking
Replace the water filter at
least every 3 months, even
if the machine has not
indicated
its
replacement.
We recommend buying a
new
filter
capacity drops to 10% and
the
filter
blinking slowly. In this way
you can replace the filter
when its capacity drops to
0%.
prepared
before
quickly.
need
for
when
its
icon
starts
The anti-scale filter should
be
replaced
indicated by the machine.
Before descaling, remove
the anti-scale filter from
the water tank.
7.3.1
Preparing and installing the
water filter
The water filter can be fitted on first installation as part
of the installation procedure. If you failed to fit the
water filter on first use, you can install it at a later
stage by accessing the menu as described below.
Remove the water filter from the package. The filter
should be set according to the measurements
performed to set water hardness. Use the water
hardness test strip (not provided).
A
Soft water
B
Hard water (standard)
C
Very hard water.
Immerse the water filter vertically (opening facing up)
in cold water and softly press its sides to make the air
bubbles get out.
English
whenever
25
Advertisement
Table of Contents
