Table of Contents
Advertisement
English
MENU ITEM
Confirm Set Credits
Exit
Stand-by Time
Safety
.
Tech Menu Password
Set
Confirm Password
Disable
Change
Maintenance Menu Password
46
Description
Press OK on one of the following options:
- YES:
confirm and save the set credits
- No:
reset the number of credits and go back to the charging screen.
Press the OK button on the EXIT option to go back to the top level.
This option allows the user to go back to the menu top level.
This function allows you to adjust the time after which the machine must go into "stand-by"
mode. In case it is not used:
- NO STANDBY:
the machine is always active
- 30 MIN:
the machine goes in standby after 30 min. inactivity
- 60 MIN:
the machine goes in standby after 60 min. inactivity
- 180 MIN:
the machine goes in standby after 180 min. inactivity.
Press the OK button on the EXIT option to go back to the top level.
This function allows you to manage the passwords to access the various machine menus: -
Tech Menu Password
- Maintenance Menu Password
- User Menu Password.
Using this option, the user can manage the Tech Menu password:
- SET:
you can access this option if the password is not set
- DISABLE:
this option is only displayed if a password is already set
- CHANGE:
Press the OK button on the EXIT option to go back to the top level.
This function allows you set the 4-digit code to access the technical menu.
The user must set the desired number, increasing or decreasing it by means of the
navigation buttons.
By pressing the OK button the cursor under the digit is moved to the right.
By pressing the OK button, after the fourth digit you access the "Confirm Password"
screen.
Press the OK button on the EXIT option to go back to the top level.
Press OK on one of the following options:
- YES:
confirm and save the set credits
- No:
go back to the password entry screen.
Press the OK button on the EXIT option to go back to the top level.
Using this option, the user can disable the set password:
In this case the password is set to "0000" by default.
Using this option, the user can change the set password:
Using this option, the user can manage the Maintenance Menu password
- SET:
you can access this option if the password is not set
- DISABLE:
this option is only displayed if a password is already set
- CHANGE:
Press the OK button on the EXIT option to go back to the top level.
Advertisement
Table of Contents
