Saeco AREA OTC SUPO48B Operation And Maintenance Manual page 47

MENU ITEM
Set
Confirm Password
Disable
Change
User Menu Password
Set
Confirm Password
Disable
Change
Exit
Restore Factory Settings
Reboot and Update from
SerProg
Exit
Back to Main Screen
Description
This function allows you set the 4-digit code to access the Maintenance menu.
The user must set the desired number, increasing or decreasing it by means of the
navigation buttons.
By pressing the OK button the cursor under the digit is moved to the right.
By pressing the OK button, after the fourth digit you access the "Confirm Password"
screen.
Press the OK button on the EXIT option to go back to the top level.
Press OK on one of the following options:
- YES:
confirm and save the set credits
- No:
go back to the password entry screen.
Press the OK button on the EXIT option to go back to the top level.
Using this option, the user can disable the set password:
In this case the password is set to "0000" by default.
Using this option, the user can change the set password:
Using this option, the user can manage the User menu password:
- SET:
you can access this option if the password is not set
- DISABLE:
this option is only displayed if a password is already set
- CHANGE:
Press the OK button on the EXIT option to go back to the top level.
This function allows you set the 4-digit code to access the User menu
The user must set the desired number, increasing or decreasing it by means of the
navigation buttons.
By pressing the OK button the cursor under the digit is moved to the right.
By pressing the OK button, after the fourth digit you access the "Confirm Password"
screen.
Press the OK button on the EXIT option to go back to the top level.
Press OK on one of the following options:
- YES:
confirm and save the set credits
- No:
go back to the password entry screen.
Press the OK button on the EXIT option to go back to the top level.
Using this option, the user can disable the set password:
In this case the password is set to "0000" by default.
Using this option, the user can change the set password:
This option allows the user to go back to the menu top level.
This function restores the factory configuration settings when a malfunction occurs.
Using the OK button the user can confirm this selection.
Using this option the user can download the firmware using the SerProgr SAECO Vending
kit.
The selection of this option using the OK button will restart the machine.
This function takes you back to the main menu
This function indicates the machine "ready for use" mode.
English
47