Saeco AREA OTC SUPO48B Operation And Maintenance Manual page 28

English
Rinse the water tank thoroughly and fill it with fresh
drinking water up to the MAX level. Press the "OK"
button. The following screen is displayed:
Remove the drip tray. After emptying it, put the drip
tray back into place. Press the "OK" button. The
following screen is displayed:
Place a large container under the dispensing spouts
(hot water, coffee and cappuccino). Press the "OK"
button. The following screen is displayed:
Press the "OK" button to pause the cycle. Press the
"OK" button again to resume the cycle. Once the
cycle ends, the screen below appears:
28
The following screen is displayed:
In case machine descaling is not necessary or when
replacing one of the 8 filters, the activation procedure
starts from this point.
Select "YES" and press the "OK" button. The following
screen is displayed:
Put the filter into the empty tank. Press it to its limit
stop.