Table of Contents
Advertisement
8.4.5
Setting Credits
Credits can be set to control sales. To set the credits,
proceed as follows:
Switch to machine programming mode as described in
section "Access to the Technical Menu".
In the Tech. Menu: settings, activate "Stop dispensing
with no credit" (ON).
Press the "Down" or "Up" button until the following
menu is displayed:
Press the "OK" button to confirm and access the
menu.
Press the "Down" or "Up" button until the following
menu is displayed:
The "SET CREDITS" option is displayed, which will
allow the number of credits to be set manually.
Press the "OK" button to confirm and access the credit
charging page.
To charge credits:
Press the "Up" or "Down" button to set the desired
number.
Press the "OK" button to move to the next number.
Repeat the steps until the desired credits have been
entered. Entered the last number the screen below
appears:
Press the "Up" or "Down" button to select the "Yes"
option and confirm.
To exit, use the "Up" or "Down" buttons to scroll until
the "Exit" option.
English
49
Advertisement
Table of Contents
