Table of Contents
Advertisement
8.4.3
Description of Messages in the Technical Menu
MENU ITEM
Machine Data
Memo Doses
Settings
Recipes management
Coffee Temperature Range
Prebrewing
Description
This function allows you to view:
- Machine Model
- Voltage and Network Frequency
- Firmware Version installed on the CPU
Press the OK button on the EXIT option to go back to the top level.
This feature allows you to access the functions for setting the dose for each product.
Select the desired product and press the OK button to start dispensing it.
Once the desired dose has been reached, press the OK button again to confirm the
operation.
Press the OK button on the EXIT option to go back to the top level.
This function allows you to access certain machine configuration parameters.
This function allows the user to individually enable or disable all recipes indicated with an
icon on the keypad.
By pressing the OK button the enabled recipes are signalled by the corresponding LED light
turning on on the keypad.
The user can enable or disable the recipe by pressing the single buttons.
The operation is confirmed by the LED light turning on or off, respectively.
Press the OK button on the EXIT option to go back to the top level.
This function allows you to select the temp. range within which capsule beverages must be
brewed (instant products excluded):
--> -2:
2°C less than the default temperature
--> 0:
default temperature
-->+2:
2°C more than the default temperature
Press the OK button on the EXIT option to go back to the top level.
Pre-brewing entails soaking the coffee pod before brewing, in order to bring out its full
aroma.
- No:
pre-brewing disabled
- Short:
1 sec. pre-brewing
- Medium:
2.5 sec. pre-brewing
- Long:
3 sec. pre-brewing
Press the OK button on the EXIT option to go back to the top level
English
43
Advertisement
Table of Contents
