Saeco AREA OTC SUPO48B Operation And Maintenance Manual page 39

MENU ITEM
Coffee temperature
Clean Cappuccinatore request
Descaling cycle
Remove the water filter
Empty Drip Tray
Insert Cappuccinatore
Place a Container Under the
Spouts
Pour Descaler and Water into
Water Tank
Water filters management
Description
This function allows you to adjust the capsule product temperature (instant products
excluded):
- MAX
- MED
- MIN
Press the OK button on the EXIT option to go back to the top level.
This function allows you to enable the Cappuccinatore cleaning cycle request at the end of
each milk product dispensing:
- OFF:
The function is disabled
- ON:
The function is enabled:
after dispensing each milk product the machine prompts the user to perform a
Cappuccinatore cleaning cycle.
If warning is ignored, request disappears after 5 sec.
Press the OK button on the EXIT option to go back to the top level.
This function allows you to run the descaling cycle.
A preliminary instruction is provided when starting descaling
- OK:
go to the next step
- EXIT:
descaling cancelled; go back to the menu top level
A preliminary instruction is provided when starting descaling
- OK:
go to the next step
- EXIT:
descaling cancelled; go back to the menu top level
A preliminary instruction is provided when starting descaling
- OK:
go to the next step
- EXIT:
descaling cancelled; go back to the menu top level
Warning:
in case the Cappuccinatore is not properly installed, it will not be possible to proceed with
the next step
A preliminary instruction is provided when starting descaling
- OK:
go to the next step
- EXIT:
descaling cancelled; go back to the menu top level
A preliminary instruction is provided when starting descaling
- OK:
descaling start
- EXIT:
descaling cancelled; go back to the menu top level
Warning:
in case there is no water in the tank, it will not be possible to proceed with the next step
This function allows you to control the water filter.
English
39