iCharger 4512DUO User Manual page 35

Important Notes
The Charging Principle for Reflex Charge Mode
Power Regenerative Mode
Channel Regenerative Mode
Channel Regenerative Mode is the feature for discharging from one channel to another channel, which supports resistor
discharge, bulbs discharge, and charging battery.
Resistance or Bulbs
4512DU
O
Dual Balance Charger/Discharger/DC Power
Reflex charge mode only supports NiMH and Pb battery. It
does not support lithium battery. Using reflex charge mode
to charge battery can reduce effectively the heating of the
battery. Go to the MEMORY SETUP → Charge → Chg
Mode to select Reflex mode.
which is when the power supply for the charger acts as
"battery power", the charger will regenerative charge for
"battery power" during the process to discharge the battery.
Go to MEMORYSETUP
→
To input.
1: Regenerative power
2: Regenerative voltage limit
1
3: Regenerative current limit
3
Lo
w
Vo
lta
ge
Li
1. Connect the resistance or bulbs to any channel of the
mi
charger;
t:
In another channel of the charger, MEMORY SETUP →
2.
9V
Discharge → Regenerative Mode → To channel, to
-4
select Resistance or bulbs，then connect the battery for
8V
discharging to this channel, and start the discharge
;
program to discharge the battery. Press STOP/START
de
button to end the program during the period.
fa
ult
:
- 35 -
10
V
4512DUO
→ →
Discharge Regenerative Mode