iCharger 4512DUO User Manual page 25

Parameters Setup
Parameters Setup
Press <TAB/SYS> button on the initial interface to enter the SYSTEM MENU interface, setting and testing of the system
parameters, storage and servo can be completed on this interface.
1
2
3
4
5
6
7
8
9
10
Charger Setup
After setting all parameters, click "Save" to save and return to the previous interface.
Temp. & Fans Setup
Select SYSTEM MENU→Temperature&Fans to enter the setup interface
When the charger's internal temperature reaches the ON Temperature, the fan will start automatically to dissipate heat,
and adjust speed automatically depends on the temperature increasing or decreasing. When the temperature exceeds the
Power Reduce temperature, the charger will stop increasing (temp. shown in orange) by reducing the highest power limit.
When the temperature reaches Shut Down temperature, the charger will shut down. [When temp. >Shut Down-3, the
temperature is shown flashing in red]. When the temperature is lower to the ON Temperature, the fan will keep running
within the setting time of OFF Delay Time.
Dual Balance Charger/Discharger/DC Power
1. Charger Setup Menu
11
2.Temp. & Fans Setup
12
4. LCD Screen
13
6. Output Power Setup
14
8.Save & Load Configuration Setup
9.Language Setup
10. Calibration
11.Extra- Function
12.Log Files Manage
14. Pulse Test
1：Temperature：
Unit：Celsius (default), Fahrenheit
Shut Down：
Power Reduce：
2：Cooling Fans：
Temperature：30℃-50℃; default: 40℃
ON
OFF Delay
- 25 -
3.Beep Tone
5.USB PD
7.Input Limit
13. Servo Test
65℃-80℃; default: 80℃
-5℃-20℃; default: -10℃
Time：0Min-10Min; default: 2Min
4512DUO