iCharger 4512DUO User Manual page 32

Pulse Measurement
Connect the signal receiver or transistor with the multifunctional port like below, which can measure their pulse signal:
Select SYSTEM MENU→Pulse Test to enter the pulse test interface, only CH-1 J1 port supports the input signal of Pulse
Measurement.
1
2
3
4
-
+
S
S
Signal Receiver or
-
Transistor
1. Pulse frequency
2. Pulse period
3. Positive pulse duty cycle and pulse width
4. Negative pulse duty cycle and pulse width
- 32 -
Dual Balance Charger/Discharger/DC Power
4512DUO