Table of Contents
Advertisement
When charging the over-discharged battery, the charger will detect if the cell voltage is larger than the Restore Lowest
Voltage, if larger, it will pre-charge the battery with Restore Charge Current, if within the setting Restore Charge Time,
the cell voltage rises to the normal value then it will turn to the charging program; otherwise it will stop running.
Pb Battery Discharge Setup
Select Program→Discharge to enter PB DISCHARGE SETUP interface.
See details about setting on LiPo/LiIo/LiFe/LiHV/LTO/NiZn/User Discharge Setup.
Pb Battery Cycle Setup
Select Program→Cycle to enter PB CYCLE SETUP interface.
See details about setting on LiPo/LiIo/LiFe/LiHV/LTO/NiZn/User Cycle Setup.
Digital Power Supply Setup
4512DUO can be an adjustable and stabilized digital power supply, setting as below:
After adding program, it will switch to Power in Type option on the MEMORY SETUP interface. After editing all
parameters for program, click "Save" to save and return to the previous interface.
1
2
3
Dual Balance Charger/Discharger/DC Power
Restore Lowest Voltage:
0.5V/Cell-2.5V/Cell; default: 1V/Cell
Restore Charge Time:
Restore Charge Current:
1.Lock：
The parameters can't be modified when running program
2.Auto start:
If run this program when power off, then the
4
program will run automatically when power on again
5
3.Live update:
running program
4.Voltage:
2V- 50V
5.Current:
1A-45A
- 24 -
1Min-5Min; default: 3Min
0.02A-0.5A; default: 0.1A
The modified parameters will take effect when
；
default: 5V
；
default: 22.5A
4512DUO
Advertisement
Table of Contents
