iCharger 4512DUO User Manual page 33

Junsi Console for 4512DUO
Please download the software via
JunsiConsoleSetup.msi to install.
Note: 4512DUO-enabled third-party software Data Explorer
http://www.hillrc.com/soft/JunsiConsoleSetup.msi,
http://www.nongnu.org/dataexplorer/download.html
- 33 -
Dual Balance Charger/Discharger/DC Power
1. Connect 458DUO with PC via USB port
(make sure USB driver has been installed),
and run the software, then the system will
find new equipment, so just click "Add"
2. Click "Start recording", and then click
"View details"
3. Start the charge/discharge program of
458DUO, then detailed data and curves can be
viewed
4512DUO
double click the file: