Start/Pause - Electrolux 6 Series Service Manual

4.4.8 Start/pause

When a programme is selected and the appliance door is closed, simply press the Start/Pause button to start
the cycle.
The corresponding LED will stop flashing and will remain lit permanently, the line of text will indicate the
operating phase in progress, while the display will alternate between the cycle time and the time at which the
cycle will end.
The operating phases indicated in the line of text are: DRYING - COOLING - ANTI-CREASE - PROLONGED
ANTI-CREASE (the latter if selected).
The time remaining and the time at which the cycle will end are identified by a symbol in front of the time.
Time necessary to complete drying
Time at which drying will end
NB: the drying time and the time at which drying will end are not fixed times, they vary according to the
humidity and size of the load inserted into the machine.
If the door has not been closed, the line of text will display the message DOOR OPEN and the LED will flash.
If the door is opened after the Start/Pause button has been pressed the cycle will stop, the LED will start to
flash and the line of text will show the message PAUSE.
After removing the error by closing the door, press Start/Pause again for the cycle to start up again.
Press the Start/Pause button during the cycle to pause the appliance.
When the appliance is on pause, you can add or remove options, but you cannot change the programmes; to
do this, in this case, you need to turn off the tumble dryer at the On/Off button.
Technical Support - A.D.L. 54/76 599 74 12-74 Rev.01