4.4.4 Setting the time of day
After selecting the language, the line of text displays the message "Time of day" and the current time is
shown in the right hand figures
.
As when setting the language, after approximately 3 seconds wait if no other button is pressed a help
message is displayed inviting the customer to turn the dial and select the time of day, after a further
3 seconds a second help message is displayed, inviting the customer to press Start/Pause to confirm
the selection.
When the dial is turned in a clockwise direction, each step corresponds to an increase of 1 hour. Once the
required hour has been reached, press Start/Pause to confirm the hours, and the display will automatically
change to adjust the minutes. Once again, turn the dial until the required minutes are displayed and then
press Start/Pause to confirm the choice.
After selecting the language and the time the machine switches to the first position at the top right and is
ready to start drying.
If a time is selected by mistake by pressing Start/Pause or if you wish to change the time, go to the
paragraph key combinations – change time of day.
Technical Support - A.D.L.
49/76
599 74 12-74 Rev.01