Installation - Electrolux 6 Series Service Manual

1.2 Installation

Remove the external film. If necessary use a
cutter blade
Take off the cardboard cover and remove the
corner elements.
Remove the polystyrene base and set the tumble
dryer in position.
WARNING
The tumble dryer weighs approximately 60 Kg
Adjust the four feet so that the appliance is installed
perfectly level (using a spirit level), to allow for
the correct flow of condensation water into the
purpose-provided tank.
WARNING
The feet must never be removed. A gap must always
be left between the bottom of the tumble dryer and
the floor to prevent the appliance from overheating.
Technical Support - A.D.L. 6/76 599 74 12-74 Rev.01