Electrolux 6 Series Service Manual page 57


Permanent removal of water collection tank full alarm
In washer dryers where the water drain kit is fitted, in order to stop the water collection tank full alarm
from being displayed automatically at the end of every cycle, press the Drying and Buzzer buttons to
disable this alarm.

Enabling or disabling the buzzer
Press the Spin speed and Buzzer buttons simultaneously to enable or disable the buzzer sounding
permanently even after the appliance has been turned off or the programme has been changed.
When the alarm is enabled (default configuration), the LED associated with the key is lit.
Technical Support - A.D.L.
Alarm disabled
Alarm enabled
57/76 599 74 12-74 Rev.01