Electrolux 6 Series Service Manual page 44


Demo mode
The Demo mode is particularly used in showrooms to demonstrate to customers how the appliance
works, by simulating the drying cycle.
To enter demo mode, turn on the tumble dryer at the On/Off button and turn the programme selector dial
by three positions and press the Start/Pause and Delay Start buttons simultaneously.
Do this within 5 seconds after the tumble dryer
The Demo mode remains enabled even after the tumble dryer has been turned off at the On/Off button.
When the On/Off button is pressed to restart the appliance, the display will show DEM for a few seconds,
to facilitate the use of the Demo function in a showroom.
To quit demo mode, cut off the electricity supply to the tumble dryer.
Technical Support - A.D.L.
WARNING
has been turned on.
44/76 599 74 12-74 Rev.01