Led Indicator Instructions - Yealink VP59 User Manual

Yealink Teams Phone
Scenario 1 Scenario 1
If the phone enables Bluetooth and not
If the handset connected to the BTH58, the on-screen
prompts " Do you want to connect BTH58 to
has connected,
your phone? ".
the phone has
no prompt.
Tap OK
 TIP TIP
If the phone disables Bluetooth, the on-screen prompts "Do you want to enable the Bluetooth and connect
BTH58 to your phone?". Tap OK
Use UVC30 Room with VP59 Use UVC30 Room with VP59
You can connect a UVC30 Room camera to the top USB port of your VP59 Teams phone

LED Indicator Instructions

LED Indicator Instructions
LED Status LED Status
Off The UVC30 Room is not properly connected to the phone or the UVC30 Room is inactive.
Flashing green There is an incoming call in the Teams meeting.
Solid green The UVC30 Room is active.
Flashing orange The UVC30 Room is upgrading firmware.
The UVC30 Room is in recovery mode and the firmware has not been upgraded.
Flashing red
Control UVC30 Camera Position Control UVC30 Camera Position
1. Tap the account avatar and go to Settings
Reset the Position for UVC30 Camera Reset the Position for UVC30 Camera
1. Tap the account avatar and go to Settings
2. Select Reset Reset.
Configure the Exposure Settings Configure the Exposure Settings
1. Tap the account avatar and go to Settings
GoMomentum.com/support | 888.538.3960
Scenario 2 Scenario 2
OK to connect, tap Cancel Cancel to charge.
OK to enable Bluetooth and connect BTH58.
Settings > Device Settings Device Settings > Control
Settings > Device Settings Device Settings > Control
Settings > Device Settings Device Settings > Exposure Settings
If the phone is the first time to pair, the on-
screen prompts" Do you want to enable the
Bluetooth and connect BTH58 to your
phone? ".
Tap OK OK to connect, tap Cancel
VP59 Teams phone to make video calls.
Description Description
Control.
Control.
Exposure Settings.
96
User Guide
User Guide
Scenario 3 Scenario 3
Cancel to charge.
96