Reboot Your Device; View Device Status - Yealink VP59 User Manual

Yealink Teams Phone
 TIP TIP
If there is another incoming Teams/SIP call, the current call will be paused. After the Teams/SIP call ends, you
can resume the call on the Microsoft Teams client. The phone enters the USB audio mode again.
Maintain Teams Devices Maintain Teams Devices
When the phone cannot be operated properly, you can investigate or troubleshoot issues along with any other
tasks your administrator may ask you to perform.

Reboot Your Device

Reboot Your Device
Your system administrator may ask you to reboot your device if it malfunctions or to assist in troubleshooting.
Procedure Procedure
1. Select the method according to your device:
VP59/MP58/MP56/MP54/CP965 VP59/MP58/MP56/MP54/CP965
Tap the account avatar and go to Settings
> Reboot Reboot.
2. Tap Reboot phone Reboot phone.
It prompts if you are sure to reboot the device.
3. Tap OK OK.

View Device Status

View Device Status
Your system administrator may ask you to view the phone status such as network, MAC, firmware, Partner APP
version, Company Portal version, and Teams version.
Procedure Procedure
1. Select the method according to your device:
VP59/MP58/MP56/MP54/CP965 VP59/MP58/MP56/MP54/CP965
Tap the account avatar and go to Settings
> About About.
Reset Your Device Reset Your Device
You can reset the device to factory settings with the need for entering the Administrator's password.
GoMomentum.com/support | 888.538.3960
Settings > Device Settings Device Settings
Settings > Device Settings Device Settings
89
MP52 MP52
Go to > Settings Settings > Device Settings Device Settings >
Reboot. Reboot
MP52 MP52
Go to > Settings Settings > Device Settings Device Settings >
About. About
User Guide
User Guide
89