Led Indicator; Configuring Transfer Mode Via Dsskey Feature - Yealink T19P-E2 Configuring Manual

Yealink IP Phones Configuring Guide
Click Save changes to accept the change.
6.
Perform auto provisioning on the phone to download above configurations. For more
7.
information on how to perform auto provisioning, refer to
on page 39.

LED Indicator

The following table shows the LED indicator associated with the line you are monitoring.
LED Status
Solid green
Fast flashing red (200ms)
Solid red
Slow flashing red (1s)
Off

Configuring Transfer Mode via Dsskey Feature

When there is an active call on your phone, you can transfer the active call to the monitored
phone number directly by pressing the enhanced monitor extension key. The phone handles the
active call differently depending on the transfer mode via DSS key.
To configure Transfer Mode via Dsskey feature via CommPortal phone configurator:
Click Features->Transfer.
1.
Select the desired type from the Transfer Mode via Dsskey field.
2.
Depending on your selection:
3.
- If you select Blind Transfer, press the enhanced monitor extension key to complete
the blind transfer to the monitored number.
- If you select Attended Transfer, press the enhanced monitor extension key to dial
out the monitored number, and then perform the attended or semi-attended transfer.
56
Description
The monitored user is idle.
The monitored user receives an incoming call.
The monitored user is busy.
The monitored user's conversation is placed on hold
(This LED status requires server support).
The call is parked against the monitored user's phone
number.
The monitored user does not exist.
Downloading Configuration Files