Type Tests And Environmental Conditions - Advantech SmartMotion ST352 Hardware Manual

5. Technical Parameters

5.3 Type tests and environmental conditions

Phenomena
ESD
RF field AM
modulated
Fast transient
Surge
RF conducted
Radiated emission
Conducted
emission
Power frequency
magnetic field
Dry heat
Cold
Damp heat
Temperature variation
Vibration
Shock
SmartMotion ST352 Hardware Manual
Test
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 55022
EN 55022
EN 61000-4-8
EN 60068-2-2
EN 60068-2-1
EN 60068-2-78
EN 60068-2-14 Nb
EN 60068-2-64
ed. 2
EN 60068-2-27
ed. 2
Table 21: Type tests and environmental conditions
5.3 Type tests and environmental conditions
Description Test levels
Enclosure contact
Enclosure air
Enclosure 20 V/m (crit. A)
(80 – 2700 MHz)
3 V/m (crit. A)
(2700 – 6000 MHz)
Signal ports
Power ports
Ethernet ports
Ethernet ports
Power ports
I/O ports
All ports 10 V/m (crit. A)
(0,15 – 80 MHz)
Enclosure Class B
DC power ports Class B
Ethernet ports Class B
Enclosure 160 A/m (crit. A)
+75 C, 40 % rel. humidity
-40 C
95 % rel. humidity (+40 C)
-40 C / +70 C, 3 h / 3 h, 2 cycles, 3 K/min
Vibration spec- Category 1 (3 axis, 8 hours
trum A.3 (rolling per axis)
stock)
half-sine, 50 g peak, 11 ms
6 kV (crit. A)
8 kV (crit. A)
2 kV (crit. A)
2 kV (crit. A)
2 kV (crit. A)
2 kV (crit. B), shielded cab.
0,5 kV (crit. B)
1 kV, L to L (crit. A)
2 kV, L to GND (crit. A)
29