Description Of The Rear Panel; Description Of The Front Panel - Advantech SmartMotion ST352 Hardware Manual

Industrial cellular router
Hide thumbs Also See for SmartMotion ST352:
Table of Contents

Advertisement

3. Router Design

3.8 Description of the rear panel

The rear panel contains only four SIM cards readers (SIM1, SIM2, SIM3 and SIM4), microSD card reader
(SD) and RST button used to restore default configuration and reboot the SmartMotion router.

3.9 Description of the front panel

On the front panel is the following:
Caption
Connector
PWR
2-pin
ETH0
RJ45
ETH1
RJ45
ANT
2x SMA
DIV
2x SMA
GPS
SMA
WiFi
R-SMA
USB
USB-A 2.0
Host
I/O
6-pin
SmartMotion ST352 Hardware Manual
Description
Connector for the power supply
Connector for connection into the computer network, PoE (only
for PoE PSE or PoE PD versions)
Connector for connection into the computer network, PoE (only
for PoE PSE or PoE PD versions)
Connector for main antenna
Connector for diversity antenna
Connector for GPS antenna
Connector for WiFi antenna (only for versions with WiFi
module!)
Connector for connection of USB devices to the router. Sup-
ports devices with PL-2303 and FTDI USB/RS232 converters.
Connector for connection of the binary inputs and output
Table 9: Front panel description
Figure 12: SmartMotion front panel
3.8 Description of the rear panel
11

Advertisement

Table of Contents
loading

Table of Contents