Toshiba G9 Installation And Operation Manual page 38

efesotomasyon.com -Toshiba inverter,drive,servo,plc
BRAKE-C
— BRAKE-C is the common leg of a single-pole double-throw form-C relay. The
BRAKE relay is the Fault Relay by default, but may be programmed to any of the selections of
Table 10 on pg.
Note: The BRAKE-A, BRAKE-B, and BRAKE-C contacts are rated at 2 A/120 VAC and
2 A/30 VDC.
Figure 9. BRAKE Switching Contacts.
Note: The BRAKE relay is shown in the
28
242. For additional information on this terminal see
de-energized state.
F132 and Figure 9 on pg.
ACE-tronics G9 ASD Installation and Operation Manual
28.