Chapter 3 Cleaning And Maintenance - Jimmy HW11 Pro Max Instruction Manual

Air path cleaning
Disassemble the dirty water tank, take out dirty water tank upper cover and filter, wash all parts and them
assemble back.
Use pipe brush to clean the dirt, foreign objects and hair inside air path of floorhead. and then load the dirty
water tank back into the floorhead assembly.
Remove the dust cup, empty the dust cup, remove HEPA, then take out cyclone and disassemble it, clean all
parts and reassemble the dust cup. (Refer to Chapter 3 "Cleaning and Maintenance" for details)

Chapter 3 Cleaning and Maintenance

Dust cup cleaning
Press the dust cup release button to remove the dust
cup from the handheld vacuum cleaner; press the
suction inlet release button to open the suction inlet
and empty the dust cup; take out cyclone assembly and
HEPA filter. Hold the metal mesh, rotate in the direction
of the arrow to unlock the metal mesh, and then remove
it downward. After cleaning, wiping and drying the parts,
assemble all parts back into dust cup, and then installed
dust cup back to handheld vacuum cleaner. (Fig 23)
Dirty water tank cleaning
After turning off the vacuum cleaner, remove the dirty
water tank, lift the water tank top cover, and remove the
foam filter frame from it, open the flip cover of the foam
filter frame, take out the foam filter. Pour out dirty water
and dirt in the water tank, then wash dirty water tank,
water tank cover, foam filter frame and foam filter. If
there is foreign matter in the dirty water tank pipe, it can
be cleaned with the cleaning brush; dry the above parts
after washing. Then reassemble all the parts back into
dirty water tank, and then load the dirty water tank into
the mainbody and continue to use.(Fig 24)
Note:1. After using upright vacuum cleaner, it is
recommended to clean the dirty tank immediately;2.
When reinstalling the filter,do not fold the black soft
rubber under the filter.
Floorhead cleaning
After removing the brushroll window, brushroll, clean
water tank, and dirty water tank, insert the multifunctional
cleaning brush through the circular hole below the
installation position of the dirty water tank to clear foreign
matter and scales in the pipe, and the clogged hair; Use
the multi-functional cleaning brush to cut off the tangled
hairs on the brushroll; Wipe the machine and the dirty
parts removed with a rag, and then put it back on the
machine separately (the brushroll can also be put into
23
24
25
HEPA Filter
Foam filter
Cyclone assembly
Dust cup release button
Dust cup
Suction inlet release
button
Foam filter
Dirty water tank
release button
Filtration basket
Dirty water tank
11