Jimmy HW11 Pro Max Instruction Manual page 10

the decorative lights go out.
In Auto mode, the machine power changes automatically
basing on how much dirty water or dust is detected. And
LED light colour changes accordingly. The more dirty
water or dust is detected, the more red lights. And the
less dirty water or dust is detected, the more blue lights.
Note:
1. When cleaning carpet, please clean the floorhead
first (refer to " Cleaning and Maintenance, Floorhead
Cleaning" for details) and to deep clean carpet it is
recommended to replace the carpet brush. (Carpet brush
can be selected according to your own needs and sold
at JIMMY distributors)
2. When the battery level is lower than 20%, it cannot be
switched to Carpet mode.
Water spray function
When upright vacuum cleaner is working, press the
water spray button, the auto water spray function is open
by default. LED screen will show auto spray indicator and
clean water will be sprayed to brushroll automatically.
(Fig 12-1). To turn off auto water spray function, keep
pressing the self cleaning button for over 3 seconds
when product is on. To turn on auto water spray function
again, keep pressing the self cleaning button for over 3
seconds when product is on.(Fig 12-2)
If floor is very dirty, you can choose to spray more water
to floor by using manual water spray function to improve
floor washing effect. With the machine turned on, press
manual water spray button, spray mouth sprays fan-
shaped water; release the water spray button to stop
spraying water. Manual water spray function can be
activated no matter whether auto water spray function is
turned on or off. (Fig 13)
Note:
1. The manual water spray button cannot be used with
the on/off button or the mode button at the same time.
2. It is recommended to use carpet mode when there is
heavy pollution or water stain.
3. When cleaning carpet, please turn off auto water spray function.
4. Please use the low-foam cleaning solution with this product for cleaning, do not put the easy foaming
cleaning solution into the clean water tank for use, otherwise more foam will be generated during use, which
may penetrate into the machine and cause danger.
Use of handheld vacuum cleaner
Take off handheld cleaner, press the handheld on/off button, the display screen will light up, default is in Floor
mode, press the handheld mode button to switch to Carpet mode. Press the handheld on/off button again to
turn off the machine, the display screen go out.
The handheld vacuum cleaner can be assembled with accessories such as crevice tool, upholstery brush,
electric mattress head for cleaning different areas (Fig 14-16)
8
12-1
Manual
spray button
13
14
16
Self cleaning
button
12-2
15