Menu item
[Antenna Port/
Set the distance from the antenna unit to the transducer in
Starboard HF
the port-starboard direction. If the transducer is located on
(LF)]
the starboard side, set a positive value.
Transducer mis-mount correction
If the DFF-3D or a CHIRP side scan compatible transducer is installed 180° in reverse
(facing stern), turn on the following item:
• DFF-3D: [Settings][Multi Beam Sonar][Initial Setup][Transducer Set-
up][Transducer Mis-mount Correction][ON]
• CHIRP Side Scan: [Settings][CHIRP Side Scan][Transducer Mis-mount Cor-
rection][ON]
3.6
Wireless LAN Setting
3.6.1
How to join an existing wireless network
By connecting to an existing network, you may download software updates and
weather information from the Internet.
1. Tap the [FURUNO] icon (
mode settings.
2. Tap [Settings], then [General].
3. Tap [Connectivity].
4. Tap [Wireless LAN Settings].
5. Tap [Wireless Mode].
6. Tap [Connect to existing LAN], then tap the [<] icon at the top left of the
display.
7. Tap [Wireless] in the [ENABLE WIRELESS] menu.
8. Tap [Scan] to scan the vicinity for accessible WLAN networks. Available networks
are listed. To delete all WLAN networks, select [Forget All Available Networks].
9. Tap the appropriate WLAN network to show the following display.
10. Tap [Connect], and the display
shown in the right figure appears.
3. HOW TO SET UP THE EQUIPMENT
Description
) to show the home screen and display
Options
(setting range)
-99.9 to +99.9
3-19