Furuno TZtouchXL TZT22X Installation Manual page 9

5. Set the TZT22X/24X to the cutout made at step 1. For installations using the
mounting plate, the screws fitted at step 4 should align with the gaps in the unit.
Note 1: Cables not shown in figure for simplification.
Note 2: Take care not to pinch the cables when fitting the unit.
6. Fasten 12 screws at the locations indicated in following figure to secure the unit.
With mounting plate: Use M430 screws.
No mounting plate: Use 420 self-tapping screws.
Screws (12 places)
7. Fit the cosmetic plates (included as installation materials) to the top and bottom of
the unit front.
1. MOUNTING
1-3