Table of Contents
Advertisement
3. HOW TO SET UP THE EQUIPMENT
How to hide unnecessary charts on the chart catalog list
1. Tap [Filter] on the chart cata-
log list title bar to show the
[Filter charts] window.
2. Select [OFF] for the items
that you want to hide. The
factory setting shows all
charts. To restore all charts,
tap [Reset Filters].
3. Tap < on the title bar to return
to the chart catalog list. [Fil-
ter] on the title bar changes to
[Change Filter].
4. Tap the close button to close
the chart catalog list.
3.8.2
How to update or add charts
Free (USA and NOAA) and for-fee compatible charts are provided by FURUNO and
Mapmedia. Go to the URL shown below to download Mapmedia charts. For FURUNO-
supplied charts, contact your local FURUNO dealer.
3.8.3
How to delete charts
Before replacing a chart, you should delete the old chart data on every NavNet
TZtouch2/3 and TZT22X/24X unit. Only delete the chart data that you intend to re-
place or no longer require.
Open the charts catalog. Tap the trashcan icon of the chart to delete. You are asked
"ARE YOU SURE YOU WANT TO DELETE THIS FILE?" Tap [OK] to delete the file.
3.9
IP Camera Setup
When connecting one or more IP camera (maximum 4), the following settings are re-
quired at the camera.
• IP Address: 172.31.200.003~172.31.200.006
• Subnet Mask: 255.255.0.0
3-22
Advertisement
Table of Contents
